Mills laboratory

• For soft, solid and fragile materials• Fineness of loading to 8 mm• A final subtlety to 0,01 mm

The planetary spherical mill of PM 200 crushes and mixes from soft, medium-hard to very hard, brittle and fibrous materials. The planetary spherical mill of PM 200 is used where the highest degree of subtlety of crushing is required. In addition to classical processes of mixing and crushing, the...

• Starting material: average hardness, firm, brittle, fibrous - dry or wet • Initial size chastits*: • Final tonkost*: <80 nm • Number of razmolny places:

• Starting material: firm, average hardness, soft, brittle, elastic, fibrous • Initial particle size: ≤ 8 mm • Final subtlety to 0, 005 mm

Thanks to reliable design the disk crusher of DM 200 can be used for quality control of raw materials under the hardest conditions kakv laboratories and pilot productions, and as a part of product line. Only several minutes are enough powerful DM 200 to receive required subtlety of...

Knife mill of Grindomix GM 200 In laboratories of quality control of foodstuff, at chemical or biological research institutes - suitable material of test for the correct analysis of food and forages is required everywhere (Some the organizations, including the State institute of the Assessment of...

Razmolny grnitura for knife mill of GM 200 Grindomix Retsch Replaceable knives from stainless steel and titanic Replaceable containers from the autoclaved plastic, glass, stainless steel Covers standard software, Covers gravitational with modulations and without.

• For soft and materials of average hardness• Fineness of loading to 15 mm• A final subtlety to 0,08 mm• Speed at 50 Hz (50 Hz): 2,850 min.-1 (3,420 min.-1)

• Starting material: viscous, average hardness, firm, brittle • Initial size chastits*: <130 mm • Final tonkost*: <5 mm

• Starting material: soft, firm, brittle, fibrous - dry or wet • Initial size chastits*: <10 mm • Final tonkost*: <1 microns, for colloid crushing <0,1 microns • Number of razmolny places: 1 • Ratio of speeds: 1:-1

• Starting material: soft, fibrous, water contents / fats / oils, average hardness, dry, elastic • Initial size chastits*: 40 mm • Final tonkost*: <300 µm

New knife mill GRINDOMIX GM 300 - the ideal tool for crushing and homogenization of foodstuff. The knife mill of GRINDOMIX GM300 allows quickly and is reproduced to process tests by volumes to 4.5 liters. Thanks to four sharp, firm knives and the industrial engine, the knife mill of GM300 is...

• Starting material: soft, fibrous • Initial size chastits*: <10 mm • Final tonkost*: <5 mm

• For brittle and materials of average hardness • Fineness of loading to 15 mm • Final subtlety to 0,1 mm

• For soft and materials of average hardness • Fineness of loading to 15 mm • Final subtlety to 0,05 mm • Speed at 50 Hz (50 Hz): 8,100 min.-1 (9,700 min.-1)