GVC - Vertical three-zonal tubular furnaces

In stock

Brand:Carbolite

Country of manufacture:United Kingdom

Payment:

Shipping:

Description

The maximum working temperature is 1200 °C
Due to division of the heated length into 3 sections, each of which is equipped with own regulator and the thermocouple, excellent uniformity of temperature is provided
The energy given to trailer sections automatically is regulated for compensation of loss of heat
Provides longer zone of uniformity, than in the single-section tubular furnace
The heated length of a working tube 450, 600, 750, 900, 1050 or 1380 mm
It is possible to establish working tubes with an external diameter up to 170 mm
All three sections are regulated on one preset value
Vertical configuration with the separate module of management
The PID-regulator of linear change of temperature on preset values with the timer of processes

Possibility of the order of working tubes from various materials
Protection against an overheat (it is recommended for protection of valuable materials and use in the automatic mode)
It can be delivered without support (only the module of management and the case of the furnace with a framework)
It can be delivered without leg (for horizontal or wall installation by means of an additional arm)
Arm for wall installation
The module management with longer, 6-meter cable
It can be delivered without support (only the module of management and the case of the furnace with a framework)
Trailer consolidations for the tubes suitable for injection of gas and vacuum
It is strictly recommended to use insulating caps and screens for protection against radiation for prevention of loss of heat and improvement of uniformity (are necessary for a vertical design)
The 3-phase or universal power supply, depending on model
8 or 20 segment programmable controller of temperature
Regulator configuration with repeated transfer of a preset value for ensuring programmable cooling
Interfaces of data transmission RS232 or graphic registrars
On demand furnaces under specific objectives of the user can be manufactured

Options of management

The MAKROLAB company is created in 2005 and specializes in deliveries of laboratory equipment for the solution of the following tasks:

Sample preparations, namely: representative sampling, mechanical crushing, definition of fractional structure, preparation of tablets for RFA (Retsch GmbH).
High-quality optical systems for the analysis of a form and the sizes of particles with a working range from 1 micron to 30 mm (Retsch Technology).
Microwave preparation of tests (acid decomposition, extraction), combustion, organic synthesis, synthesis of peptides, express analysis of moisture and fat (CEM Corporation).
Preparation of metalgraphic samples, since machines with manual giving to the difficult programmable automated systems of sample preparation operated by modern microprocessors - the equipment for cutting, a press fitting, polishing and polishing (Metkon Instruments Ltd).
Measurement and control of hardness of metals and alloys without change of its structure - hardness gages (Innovatest).
Preparation of laboratory tests for RFA by method of alloyage of glass disks in gold-platinum crucibles, receiving solutions for the analysis by the AA and ICP-OES methods (Corporation Scientifique Claisse).
The express analysis of metals and alloys - mobile and stationary spark optiko-issue spectrometers on the basis of CCD detectors (ARUN TECHNOLOGY).
X-ray fluorescent (XRF) and the X-ray diffraction (XRD) analysis - X-ray fluorescent, power dispersive spectrometers and x-ray diffractometers (PANalytical B.V.).

Characteristics:

Brand:Carbolite

Country of manufacture:United Kingdom

Information is up-to-date: 01.12.2020

Unbelievable price on GVC - Vertical three-zonal tubular furnaces in Kiev (Ukraine) company Makrolab LTD, OOO.